Cisco 300-101: CCNP ROUTE – Implementing Cisco IP Routing Online Training Course
Our Cisco IP Routing (ROUTE 300-101) course prepares you for the Cisco CCNP Routing & Switching and CCDP certifications.
Original price was: £144.00.£71.00Current price is: £71.00. inc VAT
- Instant online access
- Study at your own pace
- Secure checkout
What the Cisco 300-101: CCNP ROUTE – Implementing Cisco IP Routing course covers
Cisco 300-101: CCNP ROUTE – Implementing Cisco IP Routing runs online from start to finish, so you decide when you study and how much you cover at a time. It is built as 5 modules, so there is an obvious place to stop each time. The 12 months of access matter more than they sound: refresher reading before an inspection or an appraisal is free.
Expect to cover Plan And Design, EIGRP Enhanced Interior Gateway Routing Procol, IPv6 and OSPF. 1 more modules follow those, all named on the Modules tab.
There are no entry requirements, and it is pitched at people who need the subject for work rather than at exam candidates. We list 12 Networking & Cisco courses, of which 7 sit at Professional development. There is a certificate of completion at the end, available from your account. It is proof you covered the material, not a regulated qualification.
Worth knowing before you buy: There is no CPD accreditation attached, which matters only if somebody has specifically asked you for it.
Full course details from the training provider
Implementing Cisco IP Routing (ROUTE 300-101) is a qualifying exam for the Cisco CCNP Routing and Switching and CCDP certifications. The ROUTE 300-101 exam certifies the routing knowledge and skills of successful candidates. They are certified in using advanced IP addressing and routing in implementing scalable and highly secure Cisco routers that are connected to LANs, WANs, and IPv6. The exam also covers the configuration of highly secure routing solutions to support branch offices and mobile workers.
Course Outline
Module 1 Plan And Design
- 1.1 Introduction
- 1.2 Review Routing Fundamentals
- 1.3 Review Route Selection
- 1.4 Review Switching Versus Routing
- 1.5 Review IP Subnetting
- 1.6 Review How To Subnet
- 1.7 Review IP Address Classes
Module 2 EIGRP Enhanced Interior Gateway Routing Procol
- 2.1 Plan And Design Part1
- 2.2 Plan And Design Part2
- 2.3 EIGRP Config
- 2.4 Configuring RIPng
- 2.5 Building EIGRP Topology Table
- 2.6 EIGRP Stub Routing
- 2.7 EIGRP Summarization
- 2.8 EIGRP Load Balancing
- 2.9 Discovering Main EIGRP Configuration
- 2.10 Implementing EIGRP Through Name Config
- 2.11 Configure EIGRP Authentication
- 2.12 Configure Authentication For EIGRP Routes
Module 3 IPv6
- 3.1 Introduction To IPv6 Part1
- 3.2 Introduction To IPv6 Part2
- 3.3 IPv6 Addressing
- 3.4 Basic IPv6 Configuration
- 3.5 EIGRP For IPv6
- 3.6 BGP For IPv6
- 3.7 Configure And Optimize EIRGP For IPv6
Module 4 OSPF
- 4.1 lntroduction To OSPF Part1
- 4.2 lntroduction To OSPF Part2
- 4.3 lntroduction To OSPF Part3
- 4.4 Basic OSPF Configuration Introduction
- 4.5 Configure OSPF
- 4.6 Building The Link State Database
- 4.7 OSPF Path Selection
- 4.8 OSPF Route Summarization
- 4.9 OSPF Stub Areas
- 4.10 Implement OSPF
- 4.11 Optimize OSPF
- 4.12 OSPF Authentication Configuration
- 4.13 Configure OSPF V3
- 4.14 Basic Redistribution
Module 5 Border Gateway Protocol BGP
- 5.1 Introduction To BGP
- 5.2 BGP Specifics
- 5.3 Basic BGP
- 5.4 BGP Path Selection
- 5.5 Configure BGP Authentication
- 5.6 Configure BGP
Course Review
- 6.1 Configure Basic EIGRP
- 6.2 Basic OSPF Configuration
- 6.3 Summary Of EIGRP OSPF IPv6 BGP
- 6.4 Conclusion
Learning outcomes
- Module 1 Plan And Design
- Module 2 EIGRP Enhanced Interior Gateway Routing Procol
- Module 3 IPv6
- Module 4 OSPF
- Module 5 Border Gateway Protocol BGP
Get instant access and start learning today.
Modules
01Module 1 Plan And Design
1.1 Introduction
1.2 Review Routing Fundamentals
1.3 Review Route Selection
1.4 Review Switching Versus Routing
1.5 Review IP Subnetting
1.6 Review How To Subnet
1.7 Review IP Address Classes
02Module 2 EIGRP Enhanced Interior Gateway Routing Procol
2.1 Plan And Design Part1
2.2 Plan And Design Part2
2.3 EIGRP Config
2.4 Configuring RIPng
2.5 Building EIGRP Topology Table
2.6 EIGRP Stub Routing
2.7 EIGRP Summarization
2.8 EIGRP Load Balancing
2.9 Discovering Main EIGRP Configuration
2.10 Implementing EIGRP Through Name Config
2.11 Configure EIGRP Authentication
2.12 Configure Authentication For EIGRP Routes
03Module 3 IPv6
3.1 Introduction To IPv6 Part1
3.2 Introduction To IPv6 Part2
3.3 IPv6 Addressing
3.4 Basic IPv6 Configuration
3.5 EIGRP For IPv6
3.6 BGP For IPv6
3.7 Configure And Optimize EIRGP For IPv6
04Module 4 OSPF
4.1 lntroduction To OSPF Part1
4.2 lntroduction To OSPF Part2
4.3 lntroduction To OSPF Part3
4.4 Basic OSPF Configuration Introduction
4.5 Configure OSPF
4.6 Building The Link State Database
4.7 OSPF Path Selection
4.8 OSPF Route Summarization
4.9 OSPF Stub Areas
4.10 Implement OSPF
4.11 Optimize OSPF
4.12 OSPF Authentication Configuration
4.13 Configure OSPF V3
4.14 Basic Redistribution
05Module 5 Border Gateway Protocol BGP
5.1 Introduction To BGP
5.2 BGP Specifics
5.3 Basic BGP
5.4 BGP Path Selection
5.5 Configure BGP Authentication
5.6 Configure BGP
Course Review
6.1 Configure Basic EIGRP
6.2 Basic OSPF Configuration
6.3 Summary Of EIGRP OSPF IPv6 BGP
6.4 Conclusion
Course certificate
Upon completion of your training course, you will receive a Certificate of completion displaying your full name, course completed as well as the date of completion. You can print this out or save it digitally to showcase your accomplishment.
Frequently asked questions
How much time do I need for Cisco 300-101: CCNP ROUTE – Implementing Cisco IP Routing?
There is no fixed length: it is self-paced, so it takes as long as you give it. It picks up where you left off, so short sessions work as well as one long one. Access lasts 12 months from purchase.
Do I need any experience before I start?
None. Anyone can enrol and start the same day.
Is a certificate included?
Yes - it is available to download the moment you complete the course, and it stays in your account.
Is Cisco 300-101: CCNP ROUTE – Implementing Cisco IP Routing an accredited qualification?
No - and it is worth being clear about it. You get a certificate showing you completed the course; you do not get an Ofqual-graded qualification. Buy elsewhere if an employer has asked for the latter.
How soon do I get access?
As soon as you have paid. Your login details are emailed after checkout, and the course runs in a browser, so there is nothing to install.
Course reviews
Only verified purchasers can submit a review. Reviews are not written, rewarded or edited by us.
Only logged in customers who have purchased this product may leave a review.
Cisco Certification Complete Training Bundle
That works out at about £13.00 per course.
- Cisco CCNA 200-301 v1.1 – Cisco Certified Network Associate Training Course
- Cisco 350-401: Implementing Cisco Enterprise Network Core Technologies (ENCOR) (CCNP) Training Course
- Cisco 210-060 CICD: Implementing Cisco Collaboration Devices Online Training Course
- Cisco 210-065 CIVND: Implementing Cisco Video Network Devices Online Training Course
- Cisco 210-260 IINS: Implementing Cisco Network Security
- Cisco 200-355: Implementing Cisco Wireless Network Fundamentals Online Course
- Cisco 300-101: CCNP ROUTE – Implementing Cisco IP Routing Online Training Course
- Cisco 300-115: CCNP SWITCH – Routing and Switching Online Training Course
- Cisco 300-135: CCNP TSHOOT – Troubleshooting and Maintaining Cisco IP Networks Online Training Course
- Cisco 640-864: CCDA Cisco Certified Design Associate
- Cisco 640-461: Cisco Voice and Unified Communications Administration
Reviews
There are no reviews yet.